How to keep barreled and toted product pourable, protect sensitive material, and pick the right heater for your container size.
Most industrial liquids — resins, adhesives, oils, coatings, additives — get thicker as they cool. Drop the temperature far enough and they stop pouring, stop pumping, and stop cooperating with everything downstream. Some crystallize or separate, which can ruin the batch entirely.
Warming the container back to a working temperature restores viscosity so the product flows, dispenses, and processes the way it’s supposed to.
The trap with container heating is uneven heat. Blast one side of a drum and you scorch the product against the wall while the middle stays cold. With sensitive material, that means degraded quality and wasted product.
Full-wrap and full-jacket designs solve this by spreading heat around the entire container, warming the whole volume evenly. That’s the difference between a heater that just gets hot and one that actually does the job right.
Container size drives the choice:
Finally, dial the heat to the material. Freeze protection needs only gentle warmth; restoring a thick product to pour temperature needs more; holding a precise process temperature needs adjustable control. An adjustable thermostat lets you hold the right temperature instead of guessing.
Tell us the product and container and we’ll point you to the right size — start with the heater selector.
Wrap-around heaters that thaw, warm, and hold drum product at temperature.
Learn more →Selection
Five questions that get you to the right heater fast — without oversizing, guessing, or ending up with something that almost fits.
Read GuideFreeze Protection
Why things freeze, what it costs, and how to keep pipes, product, and cylinders working through the coldest months.
Read GuideJob Site
How to pour, cure, and dig through winter without freeze damage, blown schedules, or weak concrete.
Read GuideFreeze Protection
Why DEF freezes, what it does to your equipment, and how to keep totes, drums, and tanks above the freeze point all winter.
Read GuideCoatings
Why two-component foam and polyurea are so temperature-sensitive, and how to hold your A and B drums at spray temperature.
Read GuideSelection
How to match a heater to the power you actually have on site — 120V, 240V, or 480V, single or three phase — without tripping breakers or under-powering the job.
Read GuideContainers
How to warm, hold, and freeze-protect tanks and vessels of any size — when a stock drum or tote heater won’t reach.
Read GuideFreeze Protection
How to keep pipes, valves, and lines from freezing — matching the right heat to the run, sizing for the coldest night, and protecting the spots that fail first.
Read GuideSelection
Why gas cylinders lose pressure in the cold, and how a cylinder warmer keeps propane, CO₂, and specialty gases flowing at the rate your process needs.
Read GuideComparison
The two main ways to keep pipes, drums, totes, and tanks from freezing — how heat trace and heating blankets differ, and which one fits your job.
Read GuideGive us the container, the product, and the conditions. We’ll match you to the right solution — fast.
info@ag-heat.com · 801-244-9769 · Salt Lake City, UT