Wrap a drum, tote, or tank and circulate temperature-controlled fluid through a proprietary multi-channel path — cooling (or heating) the whole vessel evenly at minimal pump pressure, even where no heat exchanger is present. Pair it with an AG Chill unit to cool, or an AG Heat source to warm. The same wrap does both.
FluxWrap is a flexible fluid-channel jacket — a chiller or heater supplies the fluid; the wrap does the temperature control.
1
Wrap the Vessel
The wrap conforms to the drum, tote, or tank and holds thermal contact over uneven surfaces — full coverage, not one cold side.
2
Circulate Fluid
Connect an AG Chill unit (or AG Heat source) and circulate 50/50 propylene glycol through the multi-channel path — maximum flow at minimal pump pressure.
3
Hold Temperature
The insulated wrap brings the whole vessel to temperature and holds it there — cooling or heating — while cutting surface condensation.
Standard sizes for buckets, drums, and IBC totes — plus custom wraps built to virtually any vessel.
| Size | Fits | Typical Use | Spec Sheet |
|---|---|---|---|
| 5 Gallon | Buckets & pails | Small-batch product, samples, adhesives | Contact factory |
| 15 Gallon | Small drums | Chemicals, resins, specialty fluids | Contact factory |
| 30 Gallon | Drums | Process fluids, coatings, additives | Contact factory |
| 55 Gallon | Standard drums | Bulk product cooling or warming | Contact factory |
| 275 Gallon | IBC totes | Large-volume product temperature control | Contact factory |
| Custom | Tanks & any vessel | Made to fit non-standard shapes and sizes | Built to spec |
Circulate chilled fluid to cool, warm fluid to heat — one wrap, either direction. With glycol, FluxWrap heats effectively up to about 120°F.
A proprietary path delivers maximum fluid flow at minimal pressure, for even, full-coverage temperature control across the vessel.
Elastic wrap keeps thermal contact over uneven surfaces and comes insulated to hold temperature and reduce condensation.
Add temperature control to vessels that have none — the wrap is the exchanger, fed by your chiller or heater.
FluxWrap™ is a product of North Slope Chillers, supplied by AG as an authorized reseller. Specifications for reference only and subject to change. Official spec sheets and product photos available on request.
Tell us the vessel and whether you're cooling or heating, and we'll match the wrap — and the chiller or heater to feed it.
A fluid-circulation wrap that heats or cools a drum, tote, or tank by circulating temperature-controlled fluid through it — resold from North Slope Chillers.
Holding a container at a precise temperature with even, circulated cooling or heating rather than a rigid jacket.